How to Unblock a Contact in Gmail

If you are not getting any email from a contact in your Gmail, then this means you have blocked them. It is possible that you have blocked that contact by mistake or any other reason. Do not worry, here’s how you can unblock your Gmail contacts.

block gmail.jpg

Steps to Unblock a Contact in Gmail

•    Go to the email message which you have received from the contact.

•    After opening the email, you will get an Unblock “Name” option on the screen.

•    Press on the Unblock “Name” option to get a confirmation text.

•    Press on the Unblock option.

Now, you have successfully unblocked that contact from the blocked list. All the messages that contact sends you will go to the Inbox of your Gmail account.

But what if you do not get any message from the blocked contact? Then follow the steps mentioned below:

•    Press on the Settings symbol.

•    It resembles a cog or gear symbol.

•    This symbol is provided at the upper right-hand side of the main menu of Gmail.

•    Select the Settings option by going to the pull-down list, which is showing on the screen.

•    After that, press above the Filters and Blocked Addresses option.

•    Find the column which is named as “The following email addresses are blocked.”

•    Emails from that contact will go to the “Spam” column.

•    Choose the email ID of the contacts from the menu list which you wish to block.

•    Choose the “Select All” option by pressing on the link.

•    Click on that option when you do not wish to unblock all the contacts from the menu list.

•    Press on the “Unblock selected addresses” option.

•    Press on the Unblock option located in the pop-up box.

Steps to Unblock a Contact in Your Google Hangouts

•    Press on the Menu symbol.

•    It resembles a three lines vertical symbol.

•    This symbol is located at the upper right-hand side of the display.

•    By going to the menu list, find and press on the Settings option.

•    In the Settings menu, go down and press on the Blocked people option.

•    Then, find the contact which you wish to unblock.

•    Press on the Unblock option given to the right-hand side of the contact name.

Steps to Block a Contact in Gmail

•    Search and go to the email received from that contact.

•    To the right-hand side of the email, press on the More option.

•    It resembles a three dots vertical symbol.

•    Search for the Reply symbol located on the right-hand side of the display.

•    Choose the Block “Name” option by going to the menu list.

•    You will get the confirmation email on your screen.

•    In case you really want to block that contact, then press on the Block option.

Source :- http://i-mcafee.com/how-to-unblock-a-contact-in-gmail/

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

Advertisements

How to Fix Mac Finder Not Responding

The Finder is considered as a default graphical user interface shell and also the file manager and is present in all the Mac computers. Same as the File Manager, the Finder is equally responsible for opening any apps and managing disk and files. Here’s how to fix Mac finder not responding issue.

Fix-Finder-Not-Responding-Issue-on-Mac.jpg

Here’s How to Fix Mac Finder Not Responding

•    Restart Your Finder Module

1.    Go to the Finder.

2.    Go to the application.

3.    Ensure that the application should be in the foreground on the system.

4.    Keep pressing on the Shift key.

5.    Press on the Apple Now option.

6.    Choose the Force Quit Finder option.

7.    The Finder will restart automatically.

8.    In case it does not start automatically, then open the Mac Finder manually.

9.    Check if you have fixed the Mac Finder not responding issue.

It might be possible the steps mentioned above do not fix the Mac finder not responding issue. Rather than using the “Force Quit” option, you need to use the relaunch option. Here are the steps mentioned below to do so:

1.    Click on the Command + Option + Esc on your Mac keyboard.

2.    After getting the menu list of all the running apps, search for the Finder option.

3.    This option is located in the menu list.

4.    After that, press on the Relaunch option.

5.    Then, check whether you have fixed this issue.

Before we move to the next solution, you can choose the additional way to relaunch your module:

1.    Find the Finder option.

2.    This option is given on the Dock.

3.    After pressing on the Options button, you need to right-click on it.

4.    Choose the Relaunch option.

•    Kill the Restarting Process from Your Activity Monitor

1.    Go the below-mentioned path:

/Applications/Utilities

2.    Go to the Activity Monitor from the menu list.

3.    Press on the Activity Monitor option.

4.    Once the restarting process is done, you need to relaunch the Mac Finder.

5.    Then, check whether you have fixed this error or not.

•    Remove the Preference Files

1.    Go to the Applications option.

2.    Click on the Utility option.

3.    Go to the Terminal app.

4.    You need to do the Spotlight search for the Terminal app.

5.     After opening the Terminal app, run the below-mentioned command that will remove your desired files.

sudo rm ~/Library/Preferences/com.apple.finder.plist

6. After that, start restarting the system.

7. Try to open the Mac Finder.

8. Check whether you have fixed the Mac Finder not responding issue.

•    Power Cycle  a Computer

1.    Sign out from the profile.

2.    Turn off your Mac.

3.    Ensure that you unpaired the power cable.

4.    You need to wait for a few minutes.

5.    Unpair all the peripherals from your PC.

6.    Keep pressing on the Power to shut down your PC.

7.    Sign into the PC.

8.    Try to launch the Mac Finder.

9.    After that, check if you have fixed this error.

•    Check Third-party Plugins

1.    Open the App folder.

2.    Press on the View option.

3.    Press on the menu list.

4.    Now, you will get a menu list of all the apps which are saved on the PC.

5.    Choose any application, which is the reason for this issue.

6.    Click on the Uninstall option.

7.    Start the system again.

8.    Try to launch the Mac Finder once again.

Source :- https://mcafee-activate-en.com/how-to-fix-mac-finder-not-responding/

Related Article

How to Enhance Battery Life of your Oculus Quest

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How to Add Contact Info to Your Lock Screen Wallpaper

What will you do when your phone gets misplaced? Don’t worry, there are many ways to get your phone back. The easiest step you can take to get your Android or iPhone back is to add contact info to your lock screen wallpaper. Go through the steps listed below to complete this procedure.

lock screen.jpg

Steps to Add Contact Info to Your Android Lock Screen Wallpaper

•    Open the Settings menu.

•    Press on the Security button.

•    Press on the Owner info option.

•    It will open the window where you can enter all the important details.

•    Go through the checkbox given near to the “Show owner info on the lock screen” option.

•    Enter the details which you want to show as your contact info.

•    Press on the back option.

•    Now, the Android lock screen will show the details which you have entered.

Steps to Add Contact Info to Your iOS Lock Screen Wallpaper

•    Now, there is a requirement of the editing software.

•    If you use Photoshop software, then you will get a more professional look.

•    Start cropping the photo to ensure that the photo is in the selected size.

•    After getting the spot, start drawing the box and choose any dark color to fill it in the box.

•    This procedure is because the text looks separate from the photo.

•    Start using the text tool in the image editor to enter the contact info inside the box which you have created.

•    You should fill the light color so that you can read the text clearly.

•    After satisfying with selected wallpaper, you need to save and export the photo in the format which is compatible with the iPhone.

•    Pair the iOS device to the computer through USB cable.

•    Otherwise, start using programs such as Google Drive and Dropbox.

•    Go to the Settings application for the iOS device.

•    Search and press on the Wallpaper where you will get the “Choose a New Wallpaper” option.

•    Search for the photo you have created already.

•    Once you have adjusted the photo, press on the Set option to confirm your choice.

•    Now, you need to lock the iOS device to view the wallpaper you have set.

Steps to Add Contact Info to Your Lock Screen Wallpaper Through the Over App

•    Download the Over application from the App Store if you are using the iOS device.

•    Otherwise, download it from the Google Play Store in case you are using Android device.

•    You have to search for the photo to add it on the lock screen.

•    After getting the photo, open the Over application.

•    On the Over application, find the photo and open on it.

•    Now, the two boxes start showing over the photo.

•    Choose the box where you wish to add the text.

•    Press on the Done option.

•    Click on the end of the text to place it in the place where you can easily find it on your lock screen.

•    After completing the editing process, press on the Save option.

•    You have successfully created the photo now.

Source :- http://1mcafee.uk/how-to-add-contact-info-to-your-lock-screen-wallpaper/

Related Article

5 Best Apps for Splitting Bills in 2019

5 Best Meeting Management and Scheduling Apps

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How to Edit Snapchat Text Messages

Snapchat is popular for its policy that if you have sent any text to one of your friends, then you can’t edit it. There is an option to remove the unread Snaps, but there is no option to edit Snapchat text once you have sent it. Go through some instructions mentioned below to complete this procedure.

Steps to Edit Snapchat Text

•    Open the Updated Snapchat application located on the home screen of the phone or tablet.

•    In case you have signed out from the Snapchat account while updating the Snapchat application, then you have to sign in to the Snapchat account again.

•    Open the Camera display.

•    The Camera is the first thing you will get while going to the home screen.

•    In case you have launched the Stories and Chats menu to check whether there is anything new, then press on the circle symbol provided at the end of the display.

•    Open the Memories section.

•    After opening the Camera window, you will get the small circle symbol given under the Camera option. That is called Memories option.

•    Press on the Memories option so that the memories column gets open on the screen.

•    After the Memories column start showing on display, you will get the two options on the screen such as Camera Roll and Snaps tabs.

•    The former permits you to start editing the photo which you have stored on the Camera  Roll.

•    There you will get the option to view and edit the Snaps which you have stored on the Memories section.

•    Select any memories which include snaps you want to edit.

•    Find the Camera Roll.

•    Otherwise, find the Snaps column for the photo which you wish to edit.

•    After getting the snaps, press on it.

•    After loading the photo, press on the Edit and Send options.

•    When you press on the option, it will open the menu list of all the actions which are available now.

•    You will get the menu list at the end of the display.

•    On the left -hand corner of the menu list, you will get the Share, Edit, and Delete options.

•    An azure color circle located on the right-hand side will launch the Send menu.

•    Press on the Pencil symbol for opening the Edit menu provided at the upper side of the display.

•    In the Edit menu, you will get the five symbols such as Paintbrush, letter, sticker, scissors, T, and many others.

•    To the left-hand side of the symbols, you will get the Done option.

•    The Snapchat Timer symbol is given at the end of the display.

•    Now, the text box and keyboard start showing on the display which permits you to enter anything in the text.

•    The maximum number of characters should be there in the text is eighty.

•    Press on the T symbol for changing the text color and size.

•    Use the color slider for changing the color of the text which is provided on the right-hand corner of the display.

•    Press on the Done option.

•    Now, you can change the text angle,

•    Pull the caption bar where you wish to get it on display.

•    After following all these steps, you can send or share the Snap.

•    Press on the arrow symbol located in the end right-hand side of the display.

Source :- http://www-activate-mcafee.com/how-to-edit-snapchat-text-messages/

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How to Fix Windows Reporting Wrong Hard Disk Free Space

Many users are noticing that Windows is reporting wrong hard disk free space. Most users have noticed this once they have compared the folder size in Windows with the folder size after choosing the files in the hard disk. If you are facing this issue, then follow the steps mentioned below to fix it.

hard-drive

Here’s How to Fix Windows Reporting Wrong Hard Disk Free Space Error

•    Delete All Old System Restore Points

1.    Click on the Windows and R keys together to launch the Run prompt box.

2.    After that, enter “control” in the search bar.

3.    Click on the Enter option to launch the Control Panel window.

4.    After opening the Control Panel window, start using the search bar located in the upper right-hand side of the display to find the “system” option.

5.    Press the Enter button to find and press on the System option by going to the menu list of the results displayed on the screen.

6.    Press on the System Protection option given in the System option which resembles a vertical symbol provided on the left-hand side of the display.

7.    Now, the System Properties window gets open on the desktop.

8.    Ensure that you turn on the System Protection option.

9.    Go down to Protection Settings menu located in the System Protection option.

10.    Choose the Windows drive and after that, press on the Configure option.

11.    Slide down to the Disk Space Usage option after opening the System Protection window.

12.    You should limit the Max Usage over 10%.

13.    In case you have 1 TB HDD, then it is enough.

14.    Press on the option linked with the Delete all restore points to empty the storage which you have recently used through the System Restore.

15.    Press on the Apply option.

16.    After that, start the system to save the changes you have made.

17.    In case this method does not fix Windows reporting wrong hard disk free space error, then follow any other method listed in this article.

•    Run System Maintenance Troubleshooter in Windows

1.    Click on the Windows and R keys together to launch the Run prompt box.

2.    After that, enter “control” in the search box.

3.    Click on the Enter button for opening the Control panel window.

4.    Enter “troubleshooter” in the search bar when you are on the Control Panel window.

5.    Press on the Troubleshooter by going to the results menu after finding it.

6.    Press on the System and Security option provided in the Troubleshooting window.

7.    After that, you need to right-click on the option “System Maintenance” located in the System and Security troubleshoot problems window.

8.    Select the Run as Administrator option by going to the pop-up box.

9.    Press on the Advanced option given in the System Maintenance window.

10.    You should check the box linked with the Apply repairs automatically option.

11.    After that, press on the Next option.

12.    After completing the procedure, start the system again and check in case this problem is solved.

•    Delete the “rogue” trash bin file

1.    Click on the Windows and R keys together for opening the Run pop-up box.

2.    Enter cmd in the search field.

3.    Click on the Control +Shift +Enter keys together to launch the Command prompt window.

4.    After opening the Command Prompt, enter the command which is mentioned below:

rd /S “$RECYCLE.BIN.”

5. Enter the Y alphabet and after that, click on the Enter option.

6. After completing the procedure, you can exit from the Command Prompt window.

7. Start the system again to save the changes you have made.

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How to Fix Windows Hello Not Working

Windows Hello offers an additional way for their users to sign in to the personal devices through fingerprint scan, facial recognition, or iris scan. You can use Windows Hello to log in to the applications, networks, and online services. Sometimes, you may face Windows Hello not working issue on your Windows 10 PC, but don’t worry you can fix this issue by following the instructions listed below.

windows hello.jpg

Here’s How to Fix Windows Hello Not Working

•    Setting up the TPM on the system

1.    Go to the Run Utility by clicking on the Windows and R keys together on the system keyboard.

2.    You have to click on these keys together.

3.    Enter “tpm.msc” in the given box by not adding any quotation marks.

4.    Press on the OK button to launch the Trusted Platform Module Management program.

5.    Press on the Action option by going to the menu list located at the upper side of the menu.

6.    Select the Prepare the TPM… option by going to the pop-up window.

7.    You will get an option on your screen to restart the system.

8.    Read the guidelines carefully, which will show while you are doing the startup process.

9.    Press on the Restart option.

10.    Go through the guidelines during the startup process.

11.    Now, you have to check whether Windows hello not working issue is fixed or not.

•    Authorize the PIN login through registry editor

1.    Go to the Registry Editor menu by entering “regedit” in the search box.

2.    Click on the Start menu.

3.    Press on the Run pop-up box by clicking on the Windows and R keys together.

4.    Go through the below-mentioned key located in the registry editor by going to the left-hand side panel:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System

5. Press on the keys, as mentioned above.

6. Search the option which is named as “AllowDomainPINLogon.”

7. You have to right-click on the right-hand corner of the menu.

8. Select the New option.

9. After that, click on the DWORD 32-bit value option.

10. Click on the Modify button by going to the pop-up box.

11. You need to change the DWORD value to 1 located in the Edit menu below the Value data column.

12. Verify the security prompts which will show while doing this procedure.

13. You can start the system by pressing on the Start menu.

14. Click on the Power button.

15. Press on the Restart option.

16. Now, you need to check whether you have fixed Windows hello not working issue.

•    Reinstall imaging devices in device manager

1.     Press on the Start option, enter the Device Manager in the search box.

2.    Choose the Device Manager by going to the menu list of all the results by pressing on the first option.

3.    Press on the Windows and R keys together to open the Run prompt box.

4.    Enter the “devmgmt.msc” in the given box.

5.    After that, press on the OK button.

6.    You have to go to the Biometric and Imaging columns.

7.    By going to the Imaging devices column, ensure that you have followed all these steps for the webcam.

8.    In the Biometric devices,  select all the columns.

9.    You need to right-click on all the chosen entry.

10.    Select the Uninstall Device option.

11.      Verify the prompts that will ask you to verify the uninstallation of the recent driver, and you have to wait till the procedure gets completed.

12.    You need to find the name of the device and also the manufacturer.

13.    Search for the URL to their online site.

14.    Search for the latest driver of the device.

15.    After that, start downloading the latest driver.

16.    Go through the guidelines for installing the latest driver.

17.    Additionally, return to the Device Manager.

18.    Press on the Action option by going to the upper side of the menu.

19.    Press on the Scan for hardware changes button.

20.    Now, you have to check whether you have fixed Windows hello not working issue.

Source :- http://i-mcafee.com/how-to-fix-windows-hello-not-working/

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How to Fix Windows Search Bar Not Working

Windows 10 has many handy features. Because of the interconnection, you will face the Windows search bar not working issue. This a minor problem which you can fix by starting your system again. But in case you are still facing this issue after restarting your system, then follow some of the other methods which are mentioned below.

search bar.jpg

Steps to Fix Windows Search Bar Not Working by Restarting the Cortana Process

•    You need to right-click on the toolbar.

•    Otherwise, keep pressing on the touchscreen device.

•    Press on the Task Manager option by going to the menu list.

•    Open the Processes option.

•    Choose the “Task Manager” option, and it will open as the default option.

•    In case it is not, then you will get an option on the upper left-hand side of the display.

•    Ensure that you choose the More details option located at the end of the display.

•    Search for the Cortana below the processes option.

•    You need to right-click on the option.

•    After that, press on the End task button.

•    This procedure will disable the Cortana for a few seconds.

•    Then, you need to start the system again.

Steps to Fix Windows Search Bar Not Working by Re-Registering Cortana

•    Go to the File Explorer menu. It resembles a folder symbol which is generally on the toolbar.

•    Open the option mentioned below:

C:Windows\System32\WindowsPowerShell\v1.0

•    Search for the file which is named as ‘powershell.exe.’

•    You need to right-click on the file.

•    Choose the “Run as Administrator’ option.

•    Start copying the code which is mentioned below:

Get-AppXPackage -AllUsers |  For each {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}

•    Click on the Enter button.

•    Exit the PowerShell window.

•    Start the computer again.

Steps to Fix Windows Search Service

•    Click on the Windows and R keys together on the system keyboard for opening the Run menu.

•    Additionally, right-click on the Start option.

•    After that, press on the Run option.

•    Enter ‘services.msc’ in the search box.

•    Click on the OK button.

•    Search for the Windows Search option located on the menu list.

•    Go through the Status section.

•    In case it indicates ‘Running,’ then this means everything is working properly.

•    In case it is showing the black window, then you need to start it manually.

•    You have to right-click on the Windows Search feature.

•    Choose the Properties option.

•    Now, you will get a new window on display.

•    Change the Startup type option to Automatic.

•    Click on the Start option.

•    Click on the OK button.

Steps to Fix Windows Search Bar Not Working by Running System File Checker

•    You have to right-click on the Start option.

•    Choose the Run option.

•    Enter ‘cmd’ in the provided field.

•    Click on the OK button.

•    Enter sfc/scannow.

•    Click on the Enter option.

•    Let the tool to complete its scanning process.

•    Check whether you have fixed the Windows search bar is not working issue.

Source :- http://1mcafee.uk/blog/how-to-fix-windows-search-bar-not-working/

Related article

How to Use Social Media Sensibly in Time of Crisis

How to Include Multiple Pictures in Instagram Stories

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How to Access and Change DNS Settings in Windows 10 PC

Most of the users do not know what DNS is and how to change the settings for it. Don’t worry, in this article, you’ll get to know all about it. Every time when you sign up for the internet access, your device will assign with required network settings, including DNS address. This setting enables you to access the internet, the sites you open, online services you use, the files you download, and all use these settings. Though, the DNS server you’re using may not be very secure, or slower. You can always change the settings to use a more secure and reliable DNS server. In Windows 10, you can access the DNS Settings from three simple ways and also edit from there. So, if you also want to change the DNS settings in your Windows 10 computer, use the given methods.

windows 10

Note: Changing the DNS settings is not as complicated as installing a new operating system. But, before you edit it, save the settings your device currently using. This will work as a backup, in case something goes wrong or doesn’t work at that time you’ll have a way to come back.

How to access and change DNS Settings in Windows 10 through Command Prompt

If you like to use the commands, then this method is for you. However, you have two more ways to edit DNS settings. If you don’t want to use commands or find it difficult, you can use them.

1.    Launch ‘Start.’

2.    Type ‘command prompt’ in the search and press ‘Enter.’

3.    Right click on the first result.

4.    Then click ‘Run as administrator.’

5.    You’ll see command prompt windows on the screen, and now you’ve to enter the commands.

6.    Type “netsh” and press ‘Enter’ to edit the network settings.

7.    Type “interface show interface” and press ‘Enter’ to check the title of the network adapter. Note down the network adapter name you’ll need to enter it in the next command.

8.    Now, type “interface ip set dns name= “ADAPTER-NAME ” source=”static” address=”X.X.X.X” and press ‘Enter’. Make sure to change the ADAPTER-NAME with the network adapter name you see above (in Step 7), and X.X.X.X with the IP address you’d like to use.

9.    After that, type “interface ip add dns name=”ADAPTER-NAME” addr=”X.X.X.X” index=2″ and press ‘Enter’ this will add the alternative IP address. Remember to change the information in command with the settings you want to use.

10.    You can repeat the complete procedure to add more DNS server. Just increase the index number by 1 for each new DNS address.

Once complete all the settings, your Windows 10 system will now use the new DNS server you’ve set.

How to access and change DNS Settings in Windows 10 through Settings

Possibly, most of you find the above method little complex. Truly, it is complicated, and people make many mistakes in it. Leave it! Follow these steps.

1.    Go to the ‘Network & Internet’ section in Settings.

2.    Then click on your connection – Ethernet or Wi-Fi.

3.    Select your network connection.

4.    Click on the ‘Edit’ button under ‘IP settings.’ It is at the middle of the page and opens a small window Edit IP settings on the screen.

5.    Now, click the top box and select ‘Manual.’

6.    Then click the ‘IPv4’ switch and turn it on.

7.    Enter the ‘Preferred DNS’ address and ‘Alternate DNS’ address you want to use.

8.    Click the ‘Save’ button.

9.    Quit all the programs and windows.

10.    And restart the computer.

Once your computer restarts, all the changes will come into effect. Now, browse the internet with new settings.

How to access and change DNS Settings in Windows 10 through Control Panel

You can also use the Control Panel to edit DNS settings; here is how.

1.    Open ‘Network and Internet’ settings in Control Panel.

2.    Under it, click on the ‘Network and Sharing Center.’

3.    Then in the left panel, click ‘Change adapter settings.’

4.    Now, right click on your connection – Ethernet or Wi-Fi and click ‘Properties’.

5.    Scroll down in the items box and select ‘Internet Protocol Version 4 (TCP/IPv4)’.

6.    Next, click the ‘Properties’ button.

7.    Click the radio button of ‘Use the following DNS server address.’

8.    Enter the ‘Preferred DNS server’ and Alternate DNS server you want to use.

9.    Click ‘OK.’

10.    And click ‘Close.’

Finish! Now, browse more securely with your DNS server.

Source :- https://mcafee-activate-en.com/how-to-access-and-change-dns-settings-in-windows-10-pc/

Related article

How to Install Nvidia SLI on PC

How to Edit Live Photos in Your iPhone

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

Blog at WordPress.com.

Up ↑